DXsoft Produkte / HF Pager / Revisions-Geschichte (Version zum Drucken)
Produkte | Downloads | Registrierung | Feedback | Awards | Links
For compatibility with the full gateway, messages starting with >> are handled in the same way as those starting with >.
The indirect addressing of messages sent through the personal gateway (using the @ symbol at the beginning of the message) is made, which works the same way as in the full gateway.
The default URL for the weather request uses API call 3.0 instead of 2.5 .
The personal e-mail gateway now sends a confirmation e-mail when a confirmation is received from an radio correspondent.
The personal e-mail gateway is implemented in the mail -> air direction.
The personal e-mail gateway is fully implemented in the air -> mail direction.
Working with SMTP servers which do not support the HELP command is fixed.
Personal e-mail gateway was partially made.
Some bugs were fixed.
It is possible to automatically add an special header including HF Pager ID and radio station callsign now.
Minor fixes have been made.
A workaround of the RTS line control error in the Microsoft USB CDC driver (usbser.sys) was made.
HF Pager can works as a weather informer now.
The Setup / Beacon & APRS / Reset beacon timer on message or beacon is receiving option was made.
Messages and beacons from own ID are not received now.
An error in the symbol synchronization algorithm was fixed.
Used baud rate is saved in the text header of sent or received message.
The acknowledge packet (ACK) includes the Error Rate of the received message, which is then stored in the sent message text header.
The bug was fixed - a CW-ID was transmitted not only after a beacon, but also after a general message.
You can now manually set the coordinates used in the beacon when there is no GPS receiver (or when there is no data from it).
You can now include a CW-ID (up to 16 symbols) in the beacon.
The set of possible beacon transmission periods has been changed.
The waterfall displays the receiving frequencies corresponding to the selected baud rate, as well as the nominal receiving frequencies for the 1.46 bauds speed.
The weather forecasts received from the HFPgate (V1.60 NG and newer or HFP Weather) by the =x... command are converted to the human-readable form and saved into the special folder. A separate folder is created for all messages received on the same day (local or UTC time, dependings on the settings). Therefore, when the weather request is making around midnight the sequence of received forecasts can be splitted into two folders.
Minor fixes have been made.
The click on =xGPS or #(GPS) button inserts the current GPS-coordinates into the beginning of the message (in one of the two formats).
A point with the received coordinates can be displayed on the selected map by the popup menu.
The minimum preamble length has been increased to three seconds.
The retransmission logic was changed:
If a NAK (error receipt) is received, then a message is retrassmitted even if
PTT control options
At 23.44 and 46.88 baud rates ACK or NAK are repeated twice (with single preamble).
Baud rate of 23.44 Bd was added. The signal bandwidth in this mode is about 500 Hz. The center frequency of the audio signal at this speed is about 1711 Hz and cannot be changed by the user.
The Setup / Beacon & APRS / Reset beacon timer on a message sending option was made.
Any COM-port of COM1...COM99 can be used for PTT control or GPS-receiver connection.
Minor improvements of the program interface were made.
Some minor bugs were fixed.
The Carrier detector was radically redesigned.
A symbol sync was slightly improved.
Bugs in the Error Rate calculation were fixed.
The signal quality indicator (Error Rate) is been writing into the text of the received message.
Baud rate of 46.88 Bd was added. The signal bandwidth in this mode is about one kilohertz, so use it in those parts of the bands in which wide band digital modes are allowed. The center frequency of the audio signal at this speed is about 1711 Hz and cannot be changed by the user.
To reduce the load on the processor, you can reduce the number of simultanious
decoding baud rates
CPU load has been drastically reduced.
Channel busy detection algorithm was improved.
Channel sharing algorithm was improved.
The select of interface language during installation (English or Russian).
An activation key can be requested directly from the program now.
New licencing system.
Support of e-mail and SMS gates.
Support of OBS (Online Backup Service).
A bug in the installer script was fixed.
The range of automatically assigned IDs in the trial version is changed to 65401 ... 65464.
A workaround to bypass incorrect GPS output.
A support of GPS-receiver.
The first official release
Copyright © DXsoft